Skip to content

Toronto and the Middle East · Consultations in English and Persian

+1 416 939 0098فارسی

فارسیBook a consultation

Canada · Work

CPTPP work permits: no LMIA, one year, the UK added — and a spousal rule that leaves out four eligible countries

CPTPP work permits for Canada: no LMIA, TEER 0–3 jobs, a one-year first permit, the UK added in September 2026, and which spouses get an open work permit.

On this page12 sections
  1. Being from a CPTPP country is not enough
  2. Technicians need twice the work experience of professionals
  3. The wage test has a specific definition
  4. One year, and the employer has to act first
  5. Self-employment is barred, and the test is about control
  6. The spousal open work permit leaves out four eligible countries
  7. Australia’s own carve-outs
  8. The United Kingdom: a closed list of professional occupations
  9. If your occupation is regulated
  10. If you are not from a CPTPP country
  11. Related reading
  12. Source

On 2 September 2026 IRCC updated the program delivery instructions for CPTPP professionals and technicians — the guidance its own officers and CBSA officers use to decide these work permit applications. The reason was the United Kingdom. Global Affairs Canada announced on 3 July 2026 that Canada had ratified the UK’s accession to the agreement, and the agreement came into force between Canada and the UK on 1 September 2026. IRCC amended all of its CPTPP instructions to match and recorded the change in a program delivery update dated 2 September. These instructions are the officers’ manual, published as a courtesy to stakeholders, and they say plainly how these files are assessed.

The category is worth understanding because of what it removes: there is no Labour Market Impact Assessment. A Canadian employer does not have to prove they tried to hire a Canadian first. What replaces that test is a narrow set of conditions, some of which people do not expect.

Being from a CPTPP country is not enough

With the United Kingdom, the Comprehensive and Progressive Agreement for Trans-Pacific Partnership has twelve member countries, Canada among them. The professionals and technicians provisions apply to eight of the other eleven. IRCC states this directly: the provisions do not apply to citizens or permanent residents of New Zealand, Singapore and Vietnam.

Who can use the CPTPP professionals and technicians category (IRCC, as of 2 September 2026)
Status Countries
Covered Australia (citizens and permanent residents), Brunei, Chile, Japan, Malaysia, Mexico, Peru, United Kingdom
Not covered New Zealand, Singapore, Vietnam

Covered does not always mean both halves of the category. For Brunei, Malaysia and the United Kingdom, IRCC lists professional occupations only, with no technician occupations at all. Brunei’s list has a single occupation: petroleum engineers in the energy sector. For Malaysia, IRCC says outright that the agreement has no provisions for technicians.

Australia is the exception. For every other country the requirement is citizenship. For Australia, permanent residence is enough. Someone who was born elsewhere, moved to Australia and holds Australian PR can use this category on the strength of that status alone.

Technicians need twice the work experience of professionals

The category splits in two, and the split is not what most people assume. Professionals sit in the higher skill tier and need less paid experience. Technicians sit lower and need more.

Professional and technician requirements compared (IRCC, as of 2 September 2026)
Requirement Professional Technician
Occupation tier TEER 0 or 1 TEER 2 or 3
Education Post-secondary degree of 4+ years, unless the country-specific rules say otherwise Post-secondary or technical credential of 2+ years, as the minimum entry requirement for the occupation
Paid work experience 2 years in the sector of the contract 4 years in the sector of the contract
Pre-arranged Canadian job Required, in an occupation listed for that country in Annex 12-A Section D
Wage Commensurate with similarly qualified people in that industry and region

The TEER tiers apply to applications received on or after 16 November 2022. Files received on or before 15 November 2022 were assessed against the older NOC 0, A and B categories.

The wage test has a specific definition

“Commensurate” is not left to the employer’s judgment. IRCC defines the prevailing wage as the higher of two figures: the regional median hourly wage or salary for that occupation on Job Bank’s Compare wages page, or the wage inside the range the employer already pays current employees hired for the same job, at the same location, with the same skills and years of experience. Where a regional median is listed as “n/a”, the officer moves to the provincial or territorial wage, then the national one.

Two details catch people. Housing costs, travel expenses and similar non-monetary elements do not count toward meeting the wage. And there is no requirement that the worker be paid by the Canadian enterprise, or in Canadian dollars — but whatever the currency, the wage must still be consistent with the Canadian prevailing wage. Paying an Australian salary in Australian dollars does not exempt the offer from the Canadian benchmark.

One year, and the employer has to act first

The initial work permit is issued for a maximum of one year, or until the passport expires if that comes first. Extensions are at the officer’s discretion: the employer submits a new offer of employment, and the applicant documents a need for the stay to continue.

Before the application is filed, the Canadian company must submit an offer of employment through the IRCC Employer Portal and pay the employer compliance fee. IRCC is explicit that this offer does not create the ordinary employer-employee relationship as understood in the labour force — but the company that submits it still carries the conditions of the International Mobility Program and can be inspected under the employer compliance regime, with non-compliant employers named on a public list.

IRCC gives three examples of pre-arranged employment: an employee-employer relationship with a Canadian enterprise, a contract between the professional and a Canadian enterprise, or a contract between the professional’s employer in the CPTPP country and a Canadian enterprise. A person can also hold more than one contract at a time — but a separate work permit is required for each.

Self-employment is barred, and the test is about control

This category does not permit self-employment in Canada. The part that surprises people is how widely IRCC draws that line: it is not about job title or corporate form. If the Canadian enterprise offering the job is substantially controlled by the applicant, entry must be refused — even where the company is a legally distinct corporate entity.

Officers weigh whether the applicant established the business, whether they have primary, sole or de facto control of it, whether they are its primary, sole or de facto owner, and whether they are the primary, sole or de facto recipient of its income.

Being self-employed outside Canada is not a bar. A consultant running their own firm in Japan can use this category, provided the services to be delivered in Canada are pre-arranged with a Canadian employer.

At renewal, officers look for signs the person has been self-employed in Canada: incorporating a company specifically to be self-employed, initiating contact through direct mail or advertising, answering job or contract advertisements, or opening an office that functions as advertising — what IRCC calls a “sign or a shingle” outside the door. Responding to unsolicited enquiries, and running an office to deliver pre-arranged services to clients, are explicitly not self-employment.

The spousal open work permit leaves out four eligible countries

A spouse or common-law partner may be issued an open work permit under exemption code T53 — but only where the principal applicant is a citizen of Australia, Chile, Japan or Mexico, or a permanent resident of Australia.

Spousal open work permit eligibility, by the principal applicant’s status (IRCC, as of 2 September 2026)
Principal applicant is a Can the spouse get an open work permit?
Citizen of Australia, Chile, Japan or Mexico Yes
Permanent resident of Australia Yes
Citizen of Brunei, Malaysia, Peru or the United Kingdom No

So a Malaysian engineer and a Mexican engineer can hold identical work permits in the same Canadian office, and only the Mexican engineer’s partner can get an open work permit through this category. A British engineer and an Australian engineer now sit on opposite sides of the same line. The rule applies the same way to professionals and to technicians.

IRCC’s own pages disagree on Brunei. The professionals and technicians instruction leaves Brunei out of its spousal section, but the CPTPP overview, modified the same day, says an open work permit may be issued to the spouse of a Brunei professional or intra-corporate transferee. The overview’s list also leaves out Chile, which the instruction includes. The overview says the details of spousal eligibility are in the category pages, and the table above follows this instruction. If you are a citizen of Brunei or Chile, check with IRCC which rule applies.

The spouse does not need to be a citizen or national of any listed country — eligibility follows the principal applicant’s status, not the partner’s. The open permit is issued to match the validity of the principal’s work permit, and it can be issued at a port of entry. Only citizens of visa-exempt countries may apply for a work permit there; a citizen of a country that needs a visa, Iran included, applies to an IRCC office abroad, or from inside Canada if they qualify.

Australia’s own carve-outs

Each country has its own occupation list under Annex 12-A Section D. Australia’s is the broadest and is written as an exclusion list: all TEER 0 and 1 occupations are permitted except health, education and social services occupations and related occupations; judges and notaries; managers in postal and courier services; managers of telecommunications carriers; occupations related to cultural industries; and recreation, sports and fitness program and service directors.

Australia also gets an education concession that matters. The general professional rule asks for a degree of four or more years. For Australian professionals, IRCC instructs that Canadian educational requirements should be deemed met where the Australian equivalent qualification is held — generally a three-year bachelor’s degree, which is the standard Australian length. In exchange, Australian professionals need a letter from the Canadian client or employer confirming their qualifications are acceptable in Canada.

Australia’s technician list is a fixed set of occupations rather than an exclusion list, covering trades and technical fields — among them electricians, plumbers, civil, mechanical, electrical and industrial engineering technologists and technicians, aircraft avionics mechanics and inspectors, drafting and land survey technologists, construction inspectors and estimators, graphic and industrial and interior designers, international purchasing and selling agents, occupations in geomatics and meteorology, and supervisors across a range of processing and manufacturing fields.

The United Kingdom: a closed list of professional occupations

Unlike Australia’s professional list, the UK list is not an exclusion list: it is a fixed list of TEER 0 and 1 occupations, and there is no UK technician list. Most entries are in finance, engineering, science, technology and business services: financial managers, auditors and accountants, financial and investment analysts, architects and urban planners, software, civil, mechanical, electrical and other professional engineers, chemists, biologists and data scientists, cybersecurity specialists, software and web developers, management consultants, human resources professionals and economists, along with foreign legal consultants and translators. A few entries are narrowed: some research occupations count only for research and development, and some management roles only for mining consulting, environmental services or repair work. No health or teaching occupation is on the list.

The education rule is close to Australia’s. Canadian educational requirements are deemed met when a UK professional meets UK educational requirements and the Canadian client or employer provides a letter saying the qualifications are satisfactory. IRCC attaches one condition: that the UK gives similar treatment to Canadians entering under its own categories for contractual service suppliers and independent professionals.

If your occupation is regulated

Where the occupation is regulated by a province or territory, the application needs evidence of licensing or certification from the relevant Canadian or foreign regulatory body. IRCC notes that some occupations instead require the person to sit an examination after arriving in Canada. An officer must be satisfied that the applicant holds, or can obtain, the licence needed to actually do the work.

Under this instruction, language is assessed only where the officer has a concern. If they do, they can ask for evidence that the person can perform the specific job and understand workplace health and safety requirements. Where the job offer itself sets a language requirement, the applicant has to satisfy the officer they meet it. If you apply from Iran or Türkiye, the Ankara visa office checklist (IMM 5896) also applies: send IELTS, TOEFL, DELF or TEF results from the last 2 years and a police certificate with the application.

If you are not from a CPTPP country

Nothing above creates a route for someone holding a passport from a country outside the agreement. There is no CPTPP work permit for Iranian citizens as Iranian citizens, and no version of this category that a Canadian employer can use to sponsor someone the agreement does not cover.

The one place it becomes relevant is dual status. Anyone who has become a citizen of Australia, Brunei, Chile, Japan, Malaysia, Mexico, Peru or the United Kingdom — or who holds Australian permanent residence — is assessed on that status. British citizenship now counts, but only for the occupations on the UK professional list. Australian PR is the only status here that does not require citizenship.

For everyone else, the comparable LMIA-exempt routes run through other parts of the International Mobility Program — intra-company transfers, the francophone mobility stream, or a spousal open work permit — and each has its own conditions. This particular instruction does not widen any of them.

This article is general information, not legal advice, and it describes IRCC’s instructions to its officers rather than any individual case. Hadi Imani is a Regulated Canadian Immigration Consultant, licence R522575, practising in Toronto; that licence covers Canadian immigration only.

Source

About this guide

Written by Hadi Imani (registered name Hadi Imani Maman), Regulated Canadian Immigration Consultant, CICC licence R522575.

Found something out of date? Tell us

Your next step

Planning your move to Canada?

In a 30-minute consultation we go through your profile and the routes open to you, and list the documents you need.

Book a consultationCAD 100 · 30 minutesStart your assessment

Plus GST/HST if you live in Canada.

With Hadi Imani (registered name Hadi Imani Maman), Regulated Canadian Immigration Consultant, CICC licence R522575